0x0000013B: PASSIVE_INTERRUPT_ERROR fix error

BSOD 0x0000013B means that the kernel has detected problems with the interrupt at the passive level.


  1. Type of error detected. 0x1: The driver tried to get the interlock spinlock, but passed the interrupt object at the passive level.
  2. The address of the KINTERRUPT object to interrupt with the passive level.
  3. Reserved.
  4. Reserved.

To resolve the error, use the article below:

4 Recommendations for the Elimination of BSoD:

1. 0x0000013B: PASSIVE_INTERRUPT_ERROR may appear due to errors in the code of the operating system itself. Microsoft is constantly working to correct such errors, releasing patches and service packs. Installed the latest update package (Service pack) and the constant updating of the system will save a lot of errors.
2. If 0x0000013B: PASSIVE_INTERRUPT_ERROR appeared after the newly installed device driver or program. It is necessary to roll back the driver to an earlier version. With programs, things are easier, removing them will eliminate the cause of the failure. The “Run Last Known Good Configuration” option may be useful.
3. If 0x0000013B: PASSIVE_INTERRUPT_ERROR began to appear after you have connected a new device to the system, then you need to check it for compatibility with your operating system. If the device is compatible, then you need to download the latest drivers from the official website of the manufacturer and install them. If the latest drivers are installed, you need to install an earlier version of the drivers. If the device is incompatible with the operating system, then it is necessary either to change this device or to change the operating system that supports this device.
4. Very often the cause of the appearance of 0x0000013B: PASSIVE_INTERRUPT_ERROR is a malfunction of the RAM. To test it, you can use testing programs, such as memtest86+.