0x000000FE: BUGCODE_USB_DRIVER fix error

Error 0x000000FE occurred in the universal serial bus (USB) driver. 0x000000FE indicates a USB driver error.

The problem is usually caused by incorrect operation of the USB controller, or by a malfunction of the connected USB devices. Disconnect all USB devices from the computer, also try disconnecting the USB controller in the BIOS. Update your USB drivers.

4 Recommendations for the Elimination of BSoD:

1. 0x000000FE: BUGCODE_USB_DRIVER may appear due to errors in the code of the operating system itself. Microsoft is constantly working to correct such errors, releasing patches and service packs. Installed the latest update package (Service pack) and the constant updating of the system will save a lot of errors.
2. If 0x000000FE: BUGCODE_USB_DRIVER appeared after the newly installed device driver or program. It is necessary to roll back the driver to an earlier version. With programs, things are easier, removing them will eliminate the cause of the failure. The “Run Last Known Good Configuration” option may be useful.
3. If 0x000000FE: BUGCODE_USB_DRIVER began to appear after you have connected a new device to the system, then you need to check it for compatibility with your operating system. If the device is compatible, then you need to download the latest drivers from the official website of the manufacturer and install them. If the latest drivers are installed, you need to install an earlier version of the drivers. If the device is incompatible with the operating system, then it is necessary either to change this device or to change the operating system that supports this device.
4. Very often the cause of the appearance of 0x000000FE: BUGCODE_USB_DRIVER is a malfunction of the RAM. To test it, you can use testing programs, such as memtest86+.